Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Can't get pool lights to turn off with remote  (Read 2459 times)

jaarch

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Can't get pool lights to turn off with remote
« on: August 17, 2018, 05:16:55 PM »
Greetings experts! I have a pool light and waterfall feature installed with X10 switches. The waterfall works perfectly on and off with the remote however the pool light will turn on but not off with the remote. Everything functions normally when using the switches directly. The pool light is one of those rotating LED models and the switch it is connected to is a brand new XPS4. I have tried changing channels and the device number and it is still the same. The transceiver is about five feet away as well. Do I need to install a filter on the light to get this to work? If so, what filter?
Joe
Logged

JeffVolp

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 122
  • Posts: 2299
    • XTB Home Page
Re: Can't get pool lights to turn off with remote
« Reply #1 on: August 17, 2018, 05:23:39 PM »
If the pool light has a 120V plug or can be adapted to use a 120V plug, the X10 XPPF between the X10 switch and the LED pool light should do the job.  Or perhaps you can find a pool light that doesn't generate enough noise to block the X10 OFF command.

Jeff
Logged
X-10 automation since the BSR days

jaarch

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Can't get pool lights to turn off with remote
« Reply #2 on: August 17, 2018, 05:25:52 PM »
Awesome! Thank you! I'll give that a try.
Logged

jaarch

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Can't get pool lights to turn off with remote
« Reply #3 on: August 31, 2018, 05:47:27 PM »
Problem solved! I wired in an XPF filter and everything works as advertised. Thanks for the help.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.