Filters: X10's XPPF vs Smarthome's FilterLinc (1626-5/10)

Started by Walt2, March 05, 2019, 09:50:44 AM

Previous topic - Next topic

JeffVolp

Quote from: Walt2 on March 10, 2019, 10:11:19 AM
As I remember them, those X10 filters weren't much larger than the plug itself, and inside were simply a capacitor.

Gee, I don't remember any like that.  The X10 XPPF has been available for decades, and it is actually a very good filter for most devices.

Jeff
X-10 automation since the BSR days

HA Dave

Quote from: Walt2 on March 10, 2019, 10:11:19 AM
…… As I remember them, those X10 filters weren't much larger than the plug itself, and inside were simply a capacitor.

Mine look like (from a distance) a brown X10 module. Same size... shape.
Home Automation is an always changing technology

JeffVolp

Quote from: HA Dave on March 10, 2019, 02:35:16 PM
Quote from: Walt2 on March 10, 2019, 10:11:19 AM
…… As I remember them, those X10 filters weren't much larger than the plug itself, and inside were simply a capacitor.
Mine look like (from a distance) a brown X10 module. Same size... shape.

Yes, that is the XPPF.  There is a whole lot more in there than just a capacitor.  There are 3 inductors in series with the load and 3 capacitors to shunt off noise.

Jeff
X-10 automation since the BSR days

arizona480

Quote from: dhouston on March 07, 2019, 02:26:04 PM
Quote from: JeffVolp on March 07, 2019, 01:57:16 PM
Quote from: arizona480 on March 07, 2019, 01:47:37 PM
I didn't know laser printers could pull over 500 watts.
My Canon D530 says:  110-127V 50/60Hz 5.6A
My Dell C1760nw says 220-240 VAC, 50/60Hz, 5.0A or 110-127 VAC, 50/60Hz, 11.0A and I was surprised by those numbers.
Wow, I could curl up with that on a cold winter's night and stay warm!

SMF spam blocked by CleanTalk