Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Updating the CM15A Hardware Configuration  (Read 3159 times)

bf9ys02

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Updating the CM15A Hardware Configuration
« on: January 11, 2020, 10:32:27 PM »
Should I see a progress indicator when I click Update Interface?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 286
  • Posts: 10542
  • I don't work for X10, I use it successfuly!
Re: Updating the CM15A Hardware Configuration
« Reply #1 on: January 12, 2020, 07:30:23 AM »
Nothing appears on the CM15. AHP from my recollection should display a small bar which slowly turns green.
If I remember right, it is in the bottom right off the AHP screen.
I've not used my CM15 with AHP in a few years now.
 >!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

SkipWX10

  • Hero Member
  • *****
  • Helpful Post Rating: 1
  • Posts: 156
Re: Updating the CM15A Hardware Configuration
« Reply #2 on: January 12, 2020, 05:59:41 PM »
Depending on how complex your setup is, you may not see a progress bar, as it takes a very short time to update. I remember that 'clear interface memory' took longer and showed on the status bar...which IIRC is on the bottom left ;-)

Also, I think there are settings in preferences (under Tools) that allow you to get confirmation dialog popups when doing things like deleting, clearing and updating
Logged

bf9ys02

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 6
Re: Updating the CM15A Hardware Configuration
« Reply #3 on: January 25, 2020, 02:08:48 PM »
There are options for showing download complete and clear interface complete but not for interface updated.  So there was probably never a display.  Thanks.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.