Please login or register.

Login with username, password and session length

Author Topic: Documentation for Leviton 6316 / XPT3 4 Channel Dry Contact Controller  (Read 3662 times)

rjp

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5

Looking for Documentation for Leviton 6316 four input Dry Contact Controller.  The one piece I found is not correct. 

« Last Edit: March 30, 2024, 12:27:27 PM by rjp »
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Documentation for Leviton 6316 Dry Contact Controller
« Reply #1 on: March 26, 2024, 06:24:39 AM »

The X10 Cross Reference Guide.
Shows a Leviton 6316 was an X10Pro XPT3 and the 6315 an XPT2.
The scanned Leviton document page with some info attached.
The page may give you some additional information.
As the 6315 is a Maintained Dry Contact Transmitter and the 6316 is a Momentary Dry Contact Transmitter.


« Last Edit: March 26, 2024, 07:27:08 AM by Brian H »
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Documentation for Leviton 6316 Dry Contact Controller
« Reply #2 on: March 26, 2024, 04:12:57 PM »

Found a Leviton 6315 manual.
That may give you some added data.
Logged

rjp

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: Documentation for Leviton 6316 Dry Contact Controller
« Reply #3 on: March 27, 2024, 01:10:11 PM »

Thanks for the docs.  The two versions of the dry contact 4 channel modules differ in their wire color 1-4 assignments in addition to one transmitting on a contact open and the other does not transmit on an open.

I found the line monitoring logic useful to prevent collisions when two or more of these modules are used.

Thanks again.  >!
« Last Edit: March 27, 2024, 01:12:31 PM by rjp »
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.