cm15a automatically turns on lights when unplugged

Started by omar, April 13, 2005, 02:30:52 PM

Previous topic - Next topic

omar

Hello, recently I unplugged my cm15a from
my computer and let it stand alone and
about 10 minutes after, some of my lights
turned on...note that i do not have any
timers setup on my system yet...what could
be going wrong?

martin

That's odd. So CM15A detached from
computer's USB and plugged in an electrical
outlet then 10 minutes after some lights are
turning on. Were you able to reproduce this
behavior?

X10 Pro

Has this happened again? Do you have remote
controls or motion sensors that might have
been in use?

omar

Yes, it happened a few weeks ago too when i
had a power glitch at home and my computer
turned off...batteries in the cm15a seem to
be working fine

omar

No, there were no remote controls being
used and i have no motion sensors...and not
all the lights turned on, just a few

Observer

The lights that turned on, were they defined
(referenced)within any macros?

Michael F


donald mcmow


Michael F

a3 thru a8...although not all of them
turned on

X10 Pro

If you connect the interface to the PC, clear
the memory, then disconnect it, what happens?

me too

Could one of your neighbors be using x10 on
the same house code?

SMF spam blocked by CleanTalk