Topic: System won't recognize AHP (Read 3007 times)

frank shehigian · « **on:** September 12, 2005, 07:12:37 PM »

I tried to check the latest postings but
didn't find my topic. I hope this isn't too
much of a duplication. Although I have
limited experience with Active Home (all
positive) I upgraded to AHP. After
installing the software and connecting the
module with the supplied USB cable, I have
not been able to "connect" AHP. The error
message repeatedly says that the device is
not connected. My system is a Dell with
Windows 98SE. Have I purchased something i
can't use on my system? Any help would be
appreciated.

X10 Pro · « **Reply #1 on:** September 12, 2005, 08:45:47 PM »

Try this:

1. Unplug the USB cable from the AHP interface.
2. Unplug the interface form the wall.
3. Remove the batteries from the interface.
4. Connect the USB cable.
5. Plug the interface back into power.

roger1818 · « **Reply #2 on:** September 13, 2005, 10:04:16 AM »

X10 Pro: Welcome back!

david k · « **Reply #3 on:** September 13, 2005, 12:53:45 PM »

What the X10 pro said worked for me.

arf1410 · « **Reply #4 on:** September 13, 2005, 02:10:28 PM »

This problem has been reported many times
before, with the "fix" as suggested by X10
Pro, which leads to the question for X10
Pro -

What is the cause of this problem, and what
is X10 doing to resolve it?

frank · « **Reply #5 on:** September 14, 2005, 11:04:08 AM »

Thanks for the help!

News:

Author Topic: System won't recognize AHP (Read 3007 times)

frank shehigian

System won't recognize AHP

X10 Pro

Re: System won't recognize AHP

roger1818

Re: System won't recognize AHP

david k

Re: System won't recognize AHP

arf1410

Re: System won't recognize AHP

frank

Re: System won't recognize AHP