Please login or register.

Login with username, password and session length

Author Topic: Network  (Read 10961 times)

adolfo

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Network
« on: February 01, 2006, 11:43:19 AM »

I need to know how far (meters) the RF
signal travels through the electric network
Logged

Eric Edberg

  • Guest
Re: Network
« Reply #1 on: February 03, 2006, 07:01:26 AM »

RF does not travel throught the power line...
RF is transmitted over the air.  Distance is
extremely variable and is dependent on
antenna positioning and also the device doing
the sending....

While I can't provide specifics, RF reception
from a PalmPad is often between 20-50 feet.
I replaced the antenna with a home-built one
and get about 175 feet using plans from
ActiveX10.com.

RF transmission sucks on new units.  I could
barely get 10-15 feet before ant mods.  Can't
get any more as the antenna is a incoming mod
and not balanced for Tx performance.

Line-level ranges are often the same (20-50
feet) and are dependent on the noise on your
AC, power Tx from the CM15a, and other
factors.  My 3000 sq-ft house can communicate
line-level commands everywhere except 1
outlet/circuit.

Unfortunately, both of these numbers are
highly variable.

Good Luck

Eric
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.