Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[joel]

When I click "lights on" from my keychain
remote, only the lights set to the same unit
code as the base turn on. If I set them all
to the same unit code, I can't control
individule modules, only control them all at
the same time, which I do not want to do.
Anyway to have all of the lights come on but
be on different unit codes?

[gadgenator]

You need to use an Active Home macro.  (You
need Active Home to do that.)

[Brian H]

If you have a programable controller. Like
the cm11a or the newer cm15a. You can write
a macro the triggers the modules on
different codes. Like you can send a A1 ON
from your remote and that can trigger a set
of codes like A2 A3 and A4 ON and A6 OFF.
Yes a macro can turn off something when
triggered by an ON command. All from that
one macros programming. If you only have a
tranceiver and a remote then you can only
send the coded to the modules that the
remote sends.

[joel]

Thanks a lot!