Different chime module for X10?

[ptc]

Does anyone know of a different chime module
that is X10 addressable? I am using the one
that X10 ships with a motion sensor that
works great as a driveway sensor.  I would
just like a nicer sounding chime.

[Charles Sullivan]

I prefer the UM506 Universal Module, which
just sounds a beep-beep-beep-beep, plus it's
a little louder than the Chime Module.  Or
you could use the momentary contact closure
on the UM506 to trigger whatever doorbell
chime suits your fancy.

[ptc]

Thanks for the suggestion. I will give it a
try.

As a follow-up question....
I want to build in a delay for the chime so
that when motion is detected the chime is
activated and then the chime would not
activate again for a period of time, like 5
minutes.  This would avoid multiple chimes
as people walk in front of the sensor
multiple times.  It is a similar idea to the
delay in sending an 'off' command.  I think
that I may be able to program it using smart
macros, do you have any ideas?

[Charles Sullivan]

A Smart Macro seems to be a good way to go. To enable/disable the chime sound, you can use the programmable delay between On and Off signals available in the MS13A/MS14A/MS15A/MS16A motion detectors.  The MS12A has a fixed 6 minute delay but there's a hardware mod to change it at: http://www.idobartana.com/hakb/index.htm