Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: HOLD BUTTON FOR MACROS  (Read 10405 times)

JimC

  • Hero Member
  • *****
  • Helpful Post Rating: 41
  • Posts: 631
HOLD BUTTON FOR MACROS
« on: February 15, 2006, 06:39:20 AM »
It would be nice to be able to put a macro
on hold like I can with the timers simply
by checking a box. There are times when I
may want a particular macro not to run.
When the grandchildren are staying over I
may want to disable any macro, which causes
chimes to sound. I now have to go around
and unplug the chimes or delete the macro
so as not to have them wake up the little
ones.
Logged
_ _ ...  ..._ _

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: HOLD BUTTON FOR MACROS
« Reply #1 on: March 15, 2006, 04:56:17 PM »
Quote from: JimC on February 15, 2006, 06:39:20 AM
It would be nice to be able to put a macro on hold...

You could make the macro conditional on a flag setting. That way all you would need to do is set a flag when you wanted it to work and clear the flag when you didn't.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

JimC

  • Hero Member
  • *****
  • Helpful Post Rating: 41
  • Posts: 631
Re: HOLD BUTTON FOR MACROS
« Reply #2 on: March 15, 2006, 05:23:51 PM »
Steven r.
Thanks for the suggestion.  :)
The only problem is that I have not found flags to be very reliable. I use them in several macros and some times they work and other times they do not.

Jim
Logged
_ _ ...  ..._ _

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: HOLD BUTTON FOR MACROS
« Reply #3 on: March 15, 2006, 05:58:50 PM »
I had some challenges in the past with setting flags but I can't recall any problems testing them. Maybe I'll play with it some more.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: HOLD BUTTON FOR MACROS
« Reply #4 on: March 15, 2006, 07:19:42 PM »
You could make a phantom module and have it be a condition! Much more reliable than a flag! ;)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

JimC

  • Hero Member
  • *****
  • Helpful Post Rating: 41
  • Posts: 631
Re: HOLD BUTTON FOR MACROS
« Reply #5 on: March 15, 2006, 07:27:28 PM »
Tuicemen,

I'm sure that this should be obvious but I am not seeing it. It has been a long day. ??? ??? How would this work? Could you give an example?

Thanks,
 :) :)
Jim

Logged
_ _ ...  ..._ _

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: HOLD BUTTON FOR MACROS
« Reply #6 on: March 15, 2006, 07:43:03 PM »
jimc: you don't see it because it doesn't exist! ;) you have to create it!
This is how make a new module I use  House code F  (you want to make it a house code which your not useing) the module does nothing because you don't have that module but AHP thinks you do. so when you tell it to turn that module on it reports that that module is on  you can then use that modules condition(ON/OFF) as a condition in smartmacros. I made a room for mine (Phantom Modules) some I use as conditions  others trigger macros for flags ON/OFF
« Last Edit: March 15, 2006, 07:44:52 PM by Tuicemen »
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

JimC

  • Hero Member
  • *****
  • Helpful Post Rating: 41
  • Posts: 631
Re: HOLD BUTTON FOR MACROS
« Reply #7 on: March 15, 2006, 07:53:23 PM »
Tuicemen,

Thank You. I will have to give that a try as I have no confidence in using the flags. At one time I thought the flags were working fairly well. After one of the updates, and I don't recall which one, they seem to have become unreliable.

Jim
Logged
_ _ ...  ..._ _

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: HOLD BUTTON FOR MACROS
« Reply #8 on: March 15, 2006, 08:05:46 PM »
I too found them unreliable and still had some phantom modules in use without a hickup so I returned to them! ;)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.