Topic: CM15A USB Communication Problem (Read 3376 times)

mikiehahn · « **on:** July 29, 2008, 02:20:23 AM »

My CM15A worked fine for about three days.
Then without anything changing, I started to get the following pop-up every minute or so:

An error has occurred while
communicating with your ActiveHome
USB Interface. To make sure that your
timers and macros continue to run,
click OK to download your settings to
the interface.
Ok Cancel

Anyone got any ideas on how to debug this problem?
Thanks.
MH

zach1234 · « **Reply #1 on:** July 29, 2008, 04:10:48 AM »

take out battery's unplug and plug in the usb then the battery's then plug into the wall. Try another USB port.

Jsnlong · « **Reply #2 on:** July 29, 2008, 03:55:01 PM »

Seems this is being talked about in 2 threads but Have you reloaded the software. Remember to uninstall it first.

Dan Lawrence · « **Reply #3 on:** July 29, 2008, 04:55:51 PM »

Uninstalling and reinstalling will not correct it.

It's been there since AHP was first issued.

See my post in ActiveHome Pro General where you also posted the exact same "problem".

Jsnlong · « **Reply #4 on:** July 29, 2008, 10:00:37 PM »

Oh .....but all the same not everyone has the problem kinda funny thay way.

News:

Author Topic: CM15A USB Communication Problem (Read 3376 times)

mikiehahn

CM15A USB Communication Problem

zach1234

Re: CM15A USB Communication Problem

Jsnlong

Re: CM15A USB Communication Problem

Dan Lawrence

Re: CM15A USB Communication Problem

Jsnlong

Re: CM15A USB Communication Problem