Please login or register.

Login with username, password and session length

Author Topic: Protector Plus Zones  (Read 7718 times)

medlas

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Protector Plus Zones
« on: September 07, 2006, 04:56:42 PM »

Hi,

 I have the Protector Plus system with 8 door/window sensors and 8 motion sensors. Where this system has 16 zones I'm wondering if registering 1 handheld remote and 4 key chain remotes will cut my available zones from 16 to 11.

Many Thanks,
Ray
Logged

TakeTheActive

  • Hero Member
  • *****
  • Helpful Post Rating: 126
  • Posts: 1047
  • Old !@#$% Tinkerer!
Re: Protector Plus Zones
« Reply #1 on: September 08, 2006, 02:34:48 AM »

No.
Logged
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER

Duck69

  • Hero Member
  • *****
  • Helpful Post Rating: 36
  • Posts: 246
  • Unselfish Love
Re: Protector Plus Zones
« Reply #2 on: September 08, 2006, 10:55:57 AM »

 ;D The short answer is no.
 ;D The long answer is. You can add up to 16 Security remotes, in addition you can use any number of Automation remotes such as the Palm Pad. The Automation remotes can control up to 16 modules that are set to the same house code.
So, in essence you can use the Protector Plus (Transceiver) to not only receive signals from door/window sensors and motion detectors but also with 16 Security remotes, any number of Automation remotes and 16 modules, with the Protector Plus, Automation remotes and modules all set to the same house code. 
For further information, see. http://kbase.x10.com/wiki/Protector_Plus_Wireless_Voice_Dialer_Security_System
Hope this was helpful.  ;D ;D ;D
« Last Edit: September 08, 2006, 11:22:35 AM by Otis69 »
Logged
"I'm not lazy, I'm just Resistant to exertion."

tom j

  • Hero Member
  • *****
  • Helpful Post Rating: 16
  • Posts: 1270
Re: Protector Plus Zones
« Reply #3 on: September 11, 2006, 12:14:05 AM »

Nope it has no effect  ;D  ;D

Tcj
Logged

TakeTheActive

  • Hero Member
  • *****
  • Helpful Post Rating: 126
  • Posts: 1047
  • Old !@#$% Tinkerer!
Re: Protector Plus Zones
« Reply #4 on: September 11, 2006, 12:26:07 AM »

Logged
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: Protector Plus Zones
« Reply #5 on: September 11, 2006, 02:35:09 AM »

Quote

Was my original reply ambiguous?!?  Shocked  Roll Eyes


It wasn't in red letters 1 inch high  so we all thought you really weren't sure about it.



Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

TakeTheActive

  • Hero Member
  • *****
  • Helpful Post Rating: 126
  • Posts: 1047
  • Old !@#$% Tinkerer!
Re: Protector Plus Zones
« Reply #6 on: September 11, 2006, 01:10:44 PM »

Quote
Was my original reply ambiguous?!?  Shocked  Roll Eyes

It wasn't in red letters 1 inch high  so we all thought you really weren't sure about it.

Hmmm. No smilie anywhere in your reply. Does this mean that you're serious?

P.S. I thought that I'd cut back a bit on some of the "formatting"...
 
Logged
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: Protector Plus Zones
« Reply #7 on: September 11, 2006, 06:00:13 PM »

Quote
Was my original reply ambiguous?!?  Shocked  Roll Eyes

It wasn't in red letters 1 inch high  so we all thought you really weren't sure about it.

Hmmm. No smilie anywhere in your reply. Does this mean that you're serious?

P.S. I thought that I'd cut back a bit on some of the "formatting"...
 

No, I wasn't serious.

However it looked like you took it as an affront that others seconded your opinion, as if your word alone wasn't good enough.



Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

TakeTheActive

  • Hero Member
  • *****
  • Helpful Post Rating: 126
  • Posts: 1047
  • Old !@#$% Tinkerer!
Re: Protector Plus Zones
« Reply #8 on: September 12, 2006, 12:10:08 AM »

Quote
Was my original reply ambiguous?!?  Shocked  Roll Eyes

It wasn't in red letters 1 inch high  so we all thought you really weren't sure about it.

Hmmm. No smilie anywhere in your reply. Does this mean that you're serious?

P.S. I thought that I'd cut back a bit on some of the "formatting"...

No, I wasn't serious.

However it looked like you took it as an affront that others seconded your opinion, as if your word alone wasn't good enough.

None whatsoever!  [I used similies!!! (You did not.  :-[ ) See how hard it is to detect the poster's emotion without colors and formatting?  ;) ]
Logged
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: Protector Plus Zones
« Reply #9 on: September 12, 2006, 06:56:45 AM »

Quote
Was my original reply ambiguous?!?  Shocked  Roll Eyes

It wasn't in red letters 1 inch high  so we all thought you really weren't sure about it.

Hmmm. No smilie anywhere in your reply. Does this mean that you're serious?

P.S. I thought that I'd cut back a bit on some of the "formatting"...

No, I wasn't serious.

However it looked like you took it as an affront that others seconded your opinion, as if your word alone wasn't good enough.

None whatsoever!  [I used similies!!! (You did not.  :-[ ) See how hard it is to detect the poster's emotion without colors and formatting?  ;) ]

Smilies can be overdone, and they're frequently used to hide behind - make a statement but when challenged say it wasn't really serious.
Rightly or wrongly, I think that's how I viewed your post.

Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: Protector Plus Zones
« Reply #10 on: September 12, 2006, 11:37:26 AM »

I ask you to ask yourself. What kind of answer is "NO" without any explanation ?
Did the person asking the question learn ANYTHING ? Were they encouraged in any way ? Were they directed to where they could find the answer ? Was the answer "NO" helpful in any way ?  >:(

To be fair, TTA's answer was really all that the OP needed.  I assume he didn't want to face  the hassle of reregistering all his security sensors from scratch if adding the remote mucked things up.

It was good of you to flesh out the same answer with more details, and I for one (not owning a security console) learned something.

TTA's posts come across as a little brash at times - sometimes ambiguous with the smilies.   Occasionally I get the urge to call him up on it.  But he's a good guy, very knowledgeable, and puts a lot of effort into this forum.   So don't beat on him too hard.  (An occasional little beating is OK   8) )

Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.