Please login or register.

Login with username, password and session length

Author Topic: SMARTHOME Item# 1135K  (Read 3955 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 7
« on: December 16, 2006, 09:33:04 PM »

Does anyone have anything Good or Bad to say about these from Smarthome, Do they work OK , hard to setup??


[TTA Edit: Added LINK.]
« Last Edit: December 17, 2006, 10:51:02 AM by TakeTheActive »

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13272
Re: SMARTHOME Item# 1135K
« Reply #1 on: December 17, 2006, 10:22:15 AM »

TW523 is just a signal interface for non X10 equipment to send X10 signals. Has no brains at all and uses the equipment to do all the work. Like timing and protocol encoding. X10Pro PSC05 is their version of the interface.

The All house Code Receiver? The WGL V572A is such a device and many here have used it with good results.
Smarthome use to have two versions.
One used the TW523 or the X10Pro PSC05 to interface to the powerline and a wall wart power supply.
The other used their 1132B interface and the WGL Receiver with the 1132B providing both the interface and power.

In the X10 Webs Support area. Users manuals for the TW523 and its protocol can be found
Data on the WGL v572A/B [one has the interface one doesn't if you have one already] can be found at.
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.