Problem with MyHouse and Email

Started by KDR, October 19, 2006, 05:45:04 PM

Previous topic - Next topic

KDR

Still trying to sort this out but when MyHouse is connected I can't send Email's and when disconnected Email's work fine. Anyone out there that could test this with their system to see if it acts the same?
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

Tuicemen

Which method are you trying SMTP or x10Gateway? ;)
Please Read Topic:
General Forum Etiquette
Before you post!

KDR

I'm using SMTP. I was going to try the gateway next to see what happened.
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

Tuicemen

#3
well I've tested and all 3 options don't work! Now I think you have the security plug-in as well don't you?
Maybe we need to see if it works on someones setup that doesn't have OnAlert, as we know the e-mail thingy with it is flawed! ;)
update: my test was flawed I was testing with a condition that wasn't met!
it seems to work using SMTP
Please Read Topic:
General Forum Etiquette
Before you post!

Puck

No OnAlert.... email works (all 3 modes) with MyHouse Online connected.

Tuicemen

#5
Well that one using On Alert and one not using it. Both of us can send e-mail
Any one else having problems sending? ???
Please Read Topic:
General Forum Etiquette
Before you post!

KDR

OK thanks... Let me recheck some settings and see what I might have config wrong. I have 3 email accounts and 2 of them won't accept email from MyHouse and one will so thats the one I use right now. I get an error message back about a LF or something like that. I will setup that account again and write down the exact error. It has something to do with my ISP at those 2 accounts.

The other account that I do get the email from shows that the email was sent from the address I have setup in MyHouse email config sometimes and from the X10gateway other times. Kinda happens at random. I would have thought that with SMTP checked that all email would come from my address.
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

Tuicemen

Quote from: KDR on October 19, 2006, 07:25:44 PM
The other account that I do get the email from shows that the email was sent from the address I have setup in MyHouse email config sometimes and from the X10gateway other times. Kinda happens at random. I would have thought that with SMTP checked that all email would come from my address.
I've noticed this as well!
Maybe Puck can comment as to if this happens with his e-mail!
I posted this bug but your the first to state you have seen it too!  ;)
Please Read Topic:
General Forum Etiquette
Before you post!

KDR

#8
Well maybe once their Vista project is over with X10 will jump into correcting bugs, bugs and more bugs. I understand that there may be another plug-in coming out that may take priority. If they keep adding new it will take forever to correct all the problems. Though I suspect X10 can see the big picture and we only see parts of it.

What MyHouse needs is an interface to allow the end user the ability to use there own mail client to send emails if they want to rather then the one that comes with MyHouse. I see their looking into allowing end users the ability to use there own server for connecting rather then theirs. This would be a smart move on their part and less maintenance for them as well.
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

Puck

Quote from: Tuicemen on October 19, 2006, 07:38:36 PM
Maybe Puck can comment as to if this happens with his e-mail!

Just did 6 tests, 3 modes with & without MyHouse active, and all 6 email were received with my email address as entered in the configuration.

KDR

Quote from: Puck on October 19, 2006, 07:57:27 PM
Quote from: Tuicemen on October 19, 2006, 07:38:36 PM
Maybe Puck can comment as to if this happens with his e-mail!

Just did 6 tests, 3 modes with & without MyHouse active, and all 6 email were received with my email address as entered in the configuration.


When you say 3 with MyHouse active... do you mean connected to their server?
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

Tuicemen

Humm ::) I haven't heard of another plug-in in the works! but we did give them lots of ideas when X10 ;) :D ;D asked for them!
Quote from: Puck on October 19, 2006, 07:57:27 PM

Just did 6 tests, 3 modes with & without MyHouse active, and all 6 email were received with my email address as entered in the configuration.

Ok thanks that seems to confirm that the e-mail bug is ON Alert related! I was sure it worked the way I had it configured before the ON Alert plug-in was added! ;) :) :D
Please Read Topic:
General Forum Etiquette
Before you post!

Puck

Quote from: KDR on October 19, 2006, 08:01:24 PM
When you say 3 with MyHouse active... do you mean connected to their server?

Yes.... 3 connected to server & 3 disconnected.

KDR

Yeah I have the OnAlert plug-in. I have iWitness also but never loaded it because I have no need for it yet. Although since I have it I will add it soon.

Tuicemen,  You have all the plug-ins loaded not don't you? (Wonders what new adventures await me when I load it?)
Note: "Guests" may read the X10 forum , but you must register to post!

When I'm online you can find me in the Home Automation Chat Room!

Tuicemen

Yes I have all plug-ins installed!
I use most of them daily except My House Online(in server mode)! most of the problems you'll encounter you'll be able to work arround!
;) :D :)
Please Read Topic:
General Forum Etiquette
Before you post!