Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Wired camera diagrams?  (Read 34655 times)

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Wired camera diagrams?
« on: October 28, 2006, 07:29:24 PM »
I know I've seen a wiring diagram for the anywhere cam here SOMEPLACE. But I can't find it anywhere. I need to know which wires are video (+/-) and power (+/-).

What I have now is the six wire phone plug.
Logged
Home Automation is an always changing technology

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Wired camera diagrams?
« Reply #1 on: October 28, 2006, 08:16:13 PM »
Question: What is the pinout for the Anaconda, NightWatch, and XCam Anywhere camera cables?


[TTA Edit: Added description to LINK. ;) ]
« Last Edit: October 28, 2006, 09:31:22 PM by TakeTheActive »
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Wired camera diagrams?
« Reply #2 on: October 28, 2006, 10:23:32 PM »
Quote from: Puck on October 28, 2006, 08:16:13 PM
Question: What is the pinout for the Anaconda, NightWatch, and XCam Anywhere camera cables?


[TTA Edit: Added description to LINK. ;) ]


THANK-YOU Alex....err Puck.  That was what I needed.  I buried my lines to a couple wired cams. Along side the phonewire (6-wire) extention I buried a few extra wires....S-video, CAT-5, 4 wire phone... just-in-case.

Just-in-case happened (it always does) and a critter chewed Through the small part of wire (under the deck) that wasn't underground.

I am having a problem getting it to work.....I am not sure why yet.
Logged
Home Automation is an always changing technology

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Wired camera diagrams?
« Reply #3 on: October 28, 2006, 10:35:10 PM »
Quote from: Dave_x10_L on October 28, 2006, 10:23:32 PM
THANK-YOU Alex....err Puck.

We can thank TTA for fixing my post & link in the form of a question to make it more SEARCHABLE friendly.  ;)
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Wired camera diagrams?
« Reply #4 on: October 28, 2006, 11:09:33 PM »
Quote from: Puck on October 28, 2006, 10:35:10 PM
Quote from: Dave_x10_L on October 28, 2006, 10:23:32 PM
THANK-YOU Alex....err Puck.

We can thank TTA for fixing my post & link in the form of a question to make it more SEARCHABLE friendly.  ;)


Yes we can all thank TTA he does a great job keeping the forum clean looking. Thank you TTA.
« Last Edit: October 28, 2006, 11:11:26 PM by Dave_x10_L »
Logged
Home Automation is an always changing technology

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Wired camera diagrams?
« Reply #5 on: November 09, 2006, 05:45:45 PM »
Quote from: Dave_x10_L on October 28, 2006, 10:23:32 PM
Quote from: Puck on October 28, 2006, 08:16:13 PM
Question: What is the pinout for the Anaconda, NightWatch, and XCam Anywhere camera cables?


[TTA Edit: Added description to LINK. ;) ]


I buried my lines to a couple wired cams. Along side the phonewire (6-wire) extention I buried a few extra wires....S-video, CAT-5, 4 wire phone... just-in-case.

Just-in-case happened (it always does) and a critter chewed Through the small part of wire (under the deck) that wasn't underground.

I am having a problem getting it to work.....I am not sure why yet.

I have my camera back in service! I bought a crimper that can affix four or six wire phone lines as well as Cat5 ends (what is that RJ11, 14 and 45?). The roughly 50 feet of Cat5 worked fine!
Logged
Home Automation is an always changing technology

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Wired camera diagrams?
« Reply #6 on: November 09, 2006, 06:23:29 PM »
Quote from: Dave_x10_L on November 09, 2006, 05:45:45 PM
...(what is that RJ11, 14 and 45?).

I do believe:

RJ11 is used for phone lines (and X-10 CAMS) and can be 4 or 6 conductors.

RJ45 is for Ethernet (PC LAN) with 8 conductors.

Not sure about RJ14.
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Wired camera diagrams?
« Reply #7 on: November 09, 2006, 06:49:08 PM »
Thanks Puck.

At least I got my driveway cam back! I can't believe I had so much trouble getting the wires in the correct order. I guess it will make for a humorous story at my DNA (National Dyslexia Association) meeting.

Logged
Home Automation is an always changing technology

TakeTheActive

  • Hero Member
  • *****
  • Helpful Post Rating: 126
  • Posts: 1047
  • Old !@#$% Tinkerer!
Re: Wired camera diagrams?
« Reply #8 on: November 09, 2006, 08:24:30 PM »
Logged
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.