XPT and XP4D wall controler HELP!!!!!

Started by the electrican, November 19, 2006, 03:13:09 PM

Previous topic - Next topic

the electrican

ok it's wired but how do i program it !!!! it came with no instructions and there is nothing in active home pro, please help my intention is to run an all on macro, a room macro for only that room on / off ( it has 4 x10 dimmers currently ) and a perimeter lighting macro
please help or let me know if i am off base with this

Puck

I do not believe there is any programming involved, other than selecting the House & Unit Codes on the XPT Base. For example, if you haven't moved any of the dials, it probably shows A & 1. This means that the switches on the XP4D will be addressed this way (from top to bottom):

A 1
A 2
A 3


In AHP, you can trigger your macros based on those addresses.

Thru a link provided by Charles Sullivan (Re: WS4777 with electronic fluorescent ) an XPT manual is available here xpt.pdf. (Not much of one however.)

the electrican

thanks, i can't seem to get the macros to work but the rest is good