Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Help with sensor  (Read 3866 times)

danncas

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Help with sensor
« on: December 10, 2006, 10:59:37 AM »
I have a active eye sensor that turns on my front porch light and the side flood light. The problem is it triggered all the time
The street is at least 30 ft away.  I was trying to create something to stop the sensor from working after 2AM. There is a knob on the sensor but the operation sheet doesn't say what its for. Also it is turned to the min  setting ,what ever it is for.  Anyone have a solution
I have you to understand flags and there seem to be nothing about them in the help F1.
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Help with sensor
« Reply #1 on: December 10, 2006, 12:05:45 PM »
The adjustable control on the ActiveEye (MS16A) is for setting the analog OFF time... this is on the instruction sheet; see under "To Change the delay after motion is detected before an OFF code is transmitted".  ;)

If possible, lower the height of the ActiveEye and / or place some electrical tape across the top portion of the sensor's lens (make it near-sighted).
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.