[VOLUNTEERS] *Comprehensive* Filter, Passive Coupler & Signal Analyzer LINK List

Started by TakeTheActive, December 13, 2006, 12:47:51 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

TakeTheActive

December 13, 2006, 12:47:51 PM Last Edit: December 14, 2006, 09:30:00 PM by TakeTheActive
I've been meaning to do this for quite some time, but I can never seem to find my . :-[

Other the other hand, with an entire Community of X10 enthusiasts here, " Many hands make light work... " and *MANY* of you already seem to have certain items BOOKMARKED (since it appears that you post them often). ;)

Posting them in the following format would be most appreciated - just hit QUOTE to see how it's done (THANKS Puck for giving me the initiative to post this! :) ):

Filters:


Passive Couplers:


Test Equipment / Signal Analyzers:


I'll collect and move them into my T/S STICKY so that everyone can then just LINK to them. 8)

Thanks!  ;D

P.S. *PLEASE* LINK to the MANUFACTURER's site, *NOT* some vendor.

https://www.automatedoutlet.com/home.php?cat=43  [Just for a good list - have to find MANUFACTURER LINKs.]

Leviton Decora Home Automation Equipment
Low Post Count != Low Knowledge - High Post Count != High Knowledge ;)

ADVICE TO X-10 NEWBIES FROM AN X-10 OLD-TIMER

roger1818

#2
January 12, 2007, 05:22:43 PM
Just so you know, the links you provided for the Levition products are for a vendor not Leviton itself.  Leviton's website is http://www.leviton.com, but they don't seem to have very good information about their DHC products anymore.

Weebs

#3
January 30, 2007, 04:19:53 PM Last Edit: January 30, 2007, 04:26:57 PM by Weebs
After years of goofing around with transceiver placement & passive couplers to combat intermittent performance I installed this 3-wire amplified coupler.  Holy cow wish I would have done this earlier.  System is now virtually 100%.  Just plug it in.

Blurb: ...Better than the Passive Signal Bridges because this unit actively amplifies or re-generates the X10/PLC signals, your receivers will get a stronger signal than what they would have received directly from the originating transmitter via the non-amplified signal bridge...

[/list]

Active Couplers:


roger1818

#4
June 01, 2007, 02:56:20 PM
Quote from: Weebs on January 30, 2007, 04:19:53 PM
Active Couplers:


The problem with Leviton and SmartHome Coupler-Repeaters is that they don't support Extended Commands (see Problems With Extended Commands).  That is why I only recommend ACT Coupler Repeaters.  They include:


Note: the CR254 is intended for industrial applications and is not useful in a home environment.

Brian H

#5
June 01, 2007, 04:01:06 PM
Roger1818; Thank you for the data on the repeaters and tutorials you have provided for all.

Knightrider

#6
March 06, 2011, 06:10:22 PM
JVDE.us

Makers of some of the finest X10 test equipment and repeater/couplers known to man.
Remote control is cool,
but automation rules!

Dan Lawrence

#7
March 06, 2011, 09:02:13 PM
Here's the link for JVDE.us: http://jvde.us/
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

bkenobi

#8
January 31, 2012, 11:28:07 AM
Print
Go Up Pages1
User actions
SMF spam blocked by CleanTalk