Please login or register.

Login with username, password and session length

Author Topic: Lines in picture  (Read 8111 times)

jelester

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 23
Lines in picture
« on: January 16, 2007, 11:43:33 AM »

Tuicemen.
I have a a problem with my cameras.  I just recently added a router to my dsl for being able to use a wireless laptop. 
I now have lines going through my camera view.  I am sure the router and cameras are using the same frequency.  What can I do about getting rid of the lines beside moving the router(which I tried) or turning it off which works.

Jerry
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13259
Re: Lines in picture
« Reply #1 on: January 16, 2007, 04:28:59 PM »

Have you tried all 4 of the cameras frequencies with the small switch under the rubber plug? Don't forget the receivers switch on the bottom to match the camera.
Also try the router on different channels. Maybe you can find a combination that works.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Lines in picture
« Reply #2 on: January 16, 2007, 05:43:45 PM »

jelester
Do as Brian suggested! I'm not sure if your router channel can be changed If not check the manual to find out exactly what frequency it is using then set the cams and the video receiver channel to the one farthest from the routers!
There is a post on here explaining the channel frequencies, a search may turn it up!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Lines in picture
« Reply #3 on: January 16, 2007, 08:07:47 PM »

The post I think Tuicemen is refering to is here

You'll even find a great Frequency (Ghz) chart (reply #12 by netguy) there.
Logged
Home Automation is an always changing technology

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: Lines in picture
« Reply #4 on: January 16, 2007, 08:30:16 PM »

Thanks Dave that was the thread I was thinking of! ;)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.