Please login or register.

Login with username, password and session length

Author Topic: Help me figure this out...  (Read 2834 times)

hankgood

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Help me figure this out...
« on: January 23, 2007, 12:23:35 AM »

My elderly father-in-law asked me to look into a problem he was having with some exterior lights at his two-story home.

Once I dug into it I found that someone had installed a X-10 switch and two Leviton 6375 Fixture Relays wired to two outdoor fixtures. The single remote switch is rarely used and recently had the following trouble with no known cause.

One light will not come on and the other will not go off - the switch has no effect.

Where should I start ? - I'm thinking maybe replacing the switch.

Yes - one more thing - Comcast recently installed a ethernet device that transmits broadband internet over the house wiring. It was about a month before this problem arose.

Thanks,

Ha
« Last Edit: January 23, 2007, 12:28:43 AM by hankgood »
Logged

gil shultz

  • Sr. Member
  • ****
  • Helpful Post Rating: 4
  • Posts: 139
Re: Help me figure this out...
« Reply #1 on: July 11, 2007, 01:34:52 AM »

Good Evening,

Assuming the X10 is ok and when the etherent was turned on the X-10 quit working the ethernet is swamping the front end of the receiver(s).  Power down the ethernet and if the problem goes away you found it.  If not you will be having some fun. 
Gil Shultz

Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.