Please login or register.

Login with username, password and session length
Pages: [1] 2

Author Topic: [WTB] X10-compatible Glass Break Sensors  (Read 39098 times)

mienhmario

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
[WTB] X10-compatible Glass Break Sensors
« on: April 10, 2007, 10:19:54 PM »

Does anybody know where i can get glass break sensors that are compatible with X10 protector plus(DS7000)? Or, can someone suggest any reliable glass break sensors at a affortable cost without any hardwire solution? If its not compatible with X10 protector plus, i need something that sounds when someone breaks the windows and triggers all the glass break sensors or it doesnt have to without the need of a main console.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #1 on: April 11, 2007, 02:35:09 PM »

Why not use a wired glass break sensor and wire it to a door/window security sensor in place of the magnetic contact?
Automatedoutlet has many this is just one! ;)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

nswint

  • Full Member
  • ***
  • Helpful Post Rating: 4
  • Posts: 49
    • Shiksa
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #2 on: April 11, 2007, 04:07:27 PM »

Why not use a wired glass break sensor and wire it to a door/window security sensor in place of the magnetic contact?
Automatedoutlet has many this is just one! ;)

Pure Genius!
Logged

mienhmario

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #3 on: April 11, 2007, 06:01:05 PM »

But the link you showed me, arent they ultra sensitive since your attaching it to the window? Earthquakes, trucks, etc.... Cant they trip the alarm? If i used the glass break sensors instead of the magnet, what security will i get if robbers did try to open the window instead of breaking it? Im a newbie if you guys havent known yet!
Logged

JMac

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 462
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #4 on: April 11, 2007, 06:31:19 PM »

Well, then you will have to have two sensors on the door - one for "glass break" and one for "open".  Look for a good deal on the window/door sensors at X10.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #5 on: April 11, 2007, 06:32:47 PM »

But the link you showed me, arent they ultra sensitive since your attaching it to the window? Earthquakes, trucks, etc.... Cant they trip the alarm?
There are other Glass Break Sensors  at Automatedoutlet read the specs for each to see exactly how they trigger!
 If you can't find the specs drop Automatedoutlet an email and they'll supply them! ;)

Quote
If i used the glass break sensors instead of the magnet, what security will i get if robbers did try to open the window instead of breaking it? Im a newbie if you guys havent known yet!
You can wire both the magnet and the glass break sensor into the same door/windor sensor so either will trigger the alarm! ;) :D ;D You do this as if you were to wire for two magnet sensors!
Pure Genius!
nswint: Thanks :-[ :-[  ;)
« Last Edit: April 11, 2007, 06:34:19 PM by Tuicemen »
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

JMac

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 462
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #6 on: April 11, 2007, 06:36:51 PM »

Thanks for my own education .  I wasn't aware you could do that.  Gave you a helpful.........
Logged

mienhmario

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #7 on: April 11, 2007, 06:46:21 PM »

What kind of specs am i looking for? I called them and they said any glass break sensors will work if X10 window/door sensors have 2 inputs, but he said none of the glass break sensors are directly made to work for the X10, so i was stuck since i didnt know what i was asking for. One for the door/window magnets and the other for the glass break sensors! How do you go about installing them? Does the X10 window/door sensor even have two inputs?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #8 on: April 11, 2007, 06:52:22 PM »

First off You want to know what will trigger them vibration,noise,or the actual glass breaking from under them!
Second this is how you will wire it in Adding_A_Switch_To_A_Door/Window_Sensor
Just substitute one of the magnet sensors for the glass break sensor!
Still at a loss then get a security expert to set you up! ;) :D ;D
« Last Edit: April 11, 2007, 06:55:16 PM by Tuicemen »
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

mienhmario

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #9 on: April 11, 2007, 07:01:36 PM »

Still at a loss????? I've just finished reading the directions! The window/door sensor actually have another wire inside it or do i have to get my own or cut the original to size? I just need a glass break sensors that will alarm when the window actually breaks! Does it matter what kind of glass breaking sensors i get?
Logged

mienhmario

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #10 on: April 11, 2007, 07:07:01 PM »

The link you gave me, would it work just fine since im just only looking for glass breaking sensors that only detect glass breaks? Will it trip from trucks when it vibrates the windows?
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #11 on: April 11, 2007, 07:24:27 PM »

The link you gave me, would it work just fine since im just only looking for glass breaking sensors that only detect glass breaks? Will it trip from trucks when it vibrates the windows?
That you'd have to ask the seller! Not all  glass break sensors work the same. ;) :D ;D
I don't use any myself so I can't recommend a specific one! ::)
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

mienhmario

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #13 on: April 11, 2007, 07:31:49 PM »

You'll want to e-mail the seller and confirm that the contacts in the sensor are normaly closed  and ask any other information  you feel important(how they trip) Also not all sensors are wired, you need the wires to connect to the door/window module! ;) :D ;D
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

mienhmario

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 20
Re: [WTB] X10-compatible Glass Break Sensors
« Reply #14 on: April 11, 2007, 07:36:20 PM »

contacts in the sensors are normally closed? What does that mean? I've just finished reading the directions! The window/door sensor actually have another wire inside it or do i have to get my own or cut the original to size from the window/door module?
Logged
Pages: [1] 2
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.