💬General Category > General Discussion

Newbie, Need security system setup help

(1/2) > >>

billharrison:
Hi all.  Was the recent victim of a break-in, and want to set up a security system.  Here is what I have in mind, want to know if I can do this using X10 products.

I want to run everything from a PC, I have a couple that run 24/7.  Here is what I want to be able to do.

3-4 cameras, all with motion detection.  Want to be able to record anything going on in the house while im away, and have it emailed / texted to me.

2 door entry sensors, and probably 4-6 window sensors.  Want to be able to customize macros based on these.  Need a siren as well as the ability to cause the cameras to take pictures on entry from any of these points.

Possibly later I will want to implement some home automation, perhaps based on some of these sensors.  I need a way to arm and disarm the system, but am not really interested in adding a security panel....  Any suggestions here?

Lastly want to add a biometric / electronic door lock to the front, do any interface with x10 and perhaps arm or disarm the system when authenticated and unlocked?

Tuicemen:
Active Home pro with all the plug-ins will do everything you mentioned as I have it doing this! ;)
I have a DS7000 security console but use it at the cottage. The same sensors for it are used with my Active Home Pro setup at home here!
 :)

billharrison:
Sounds great!  Looks like I will start ordering some parts soon!  What is the best computer interface module thingy.....  ? 

Tuicemen:
If you order Active Home Pro (software) it comes with the CM15A USB computer interface(Hardware)
Activehome Pro wil only work with this! although other softwar will work with the CM15A.
As for which is the best well that depends who you ask! ;) :D ;D

Tuicemen:
MeThinks Oviously you've missed something as my system shows an armed status with out your solder workaround!  ;)

--- Quote ---If that's the way you want to go though, there is plenty of help on how to do it, just search for arming console via macro....
--- End quote ---
billharrison doesn't wish to use a console

--- Quote --- I need a way to arm and disarm the system, but am not really interested in adding a security panel....  Any suggestions here?
--- End quote ---
See my thread Topic: Tips and Helpfull Suggestions!  (Read 1962 times)

Navigation

[0] Message Index

[#] Next page