[HELP] After 2 Mods, Some Voltage STILL Appears at AM486 Output When Unit is OFF?!?

[dave w]

Now admit it...ain't this stuff fun!

[cj4331]

James,

You mentioned 2 mods.  I've done cut the jumper on pin 7 but current is still getting through when the appliance module is of--It causes my compact fluorescent to blink.  I can't find any references to the diode disconnect.  Can you point me to some info one that?

[Brian H]

I believe it is here: http://www.idobartana.com/hakb/index.htm

[KDR]

Another way around this might be to use a Socket Rocket in place of the Appliance Module. All you need to do is program the Socket Rocket to the same House/Unit code.

I have several CFL's in them and have had no side effects and I think X10 has a sale on them right now, 4 for the price of 1.

^{----------------KDR}

[cj4331]

http://www.idobartana.com/hakb/index.htm it is.  Thanks I just did that and it fixed the problem.  Thanks!

[KDR]

http://www.geocities.com/idobartana/ it is. Thanks I just did that and it fixed the problem. Thanks!

Good to hear cj4331.

^{----------------KDR}