Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Gymrat]

Just about all of my wall outlets are turning on and off by themselves. I have deleted all timers and have gone as far as un plugging the USB interface and they still do it. They seem to go on and off at random and it can happen any time of the day. Any ideas?

[KDR]

Gymrat Since you commented that you unplugged the USB I assume you have the CM15A and AHP. With the CM15A hooked up what does the Activity Monitor show for activity? Also what other X10 gear do you have?

^{----------------KDR}

[Puck]

And did you unplug the CM15A from the outlet?
Do you have any other Transceivers plugged in (TM751, RR501, DS7000)?

[Gymrat]

I have pro spotlights everything is turned off. The USB is unplugged from the wall and disconnected from the computer. When the outlets turn on by themselves, if I use a mini controller to turn them off , they sometimes turn right back on or it can take awhile.

[HA Dave]

........if I use a mini controller to turn them off , they sometimes turn right back on or it can take awhile.

Try UN-plugging the mini timer... and plug the CM15A back in. Make sure your AHP (software) is set to monitor the codes your having trouble with. Reviewing the monitored report should give you an idea of whats going on. It could be as simple as the mini timer, or a neighbor is using those codes.