Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Is there some way to change the code on a socket rocket  (Read 6173 times)

Teye

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Is there some way to change the code on a socket rocket
« on: October 10, 2007, 10:38:05 PM »
Is there some way to change the code on a socket rocket using the active home pro program or do you need to by a controler
of some type if so what does anyone recomend.
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Is there some way to change the code on a socket rocket
« Reply #1 on: October 10, 2007, 11:06:22 PM »
Quote from: Teye on October 10, 2007, 10:38:05 PM

Is there some way to change the code on a socket rocket using the active home pro program or do you need to by a controler
of some type if so what does anyone recomend.


It's best (easier?) to change the code if you have a clear strong signal. I have done it using the AHP. I happened to have a lamp, with its cord within reach of the AHP plug. I simply plugged the lamp in the same plug above the AHP interface, put the SocketRocket in the lamp. Then turned the new code ON three times ... it worked for me.
Logged
Home Automation is an always changing technology

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: Is there some way to change the code on a socket rocket
« Reply #2 on: October 11, 2007, 08:01:09 PM »
Some say temporarily add a Chime Module on the Address you want. You have 30 seconds from power on to change it by chiming the chime three times; works best; others have written a macro to send the address.
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: Is there some way to change the code on a socket rocket
« Reply #3 on: October 12, 2007, 09:35:09 AM »
I've always used a HR12A palm pad to do this ! ;)
However others have programed it with Active Home Pro as Dave_x10_L stated!
Note:  As Brian H stated:
Quote
You have 30 seconds from power on to change it

If it takes you longer then this to send the commands the code will not change!
« Last Edit: October 12, 2007, 09:36:41 AM by Tuicemen »
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: Is there some way to change the code on a socket rocket
« Reply #4 on: October 12, 2007, 06:56:01 PM »
I use a MC460 and a lamp to change code on a Socket Rocket.   No muss, no fuss.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

barretusa

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Is there some way to change the code on a socket rocket
« Reply #5 on: October 13, 2007, 05:02:56 PM »
Hi, yes I am new to this but think I have my head around most of it now.....the only thing I can not get to work is the socket rocket. I have plugged a lamp into the socket above where the AHP is plugged in, I have tried using a macro and chime, I am sending the ON command within 30 seconds but still can not get it programmed. I am using the house code O and tried setting the unit code to 06 and 08. An idea's or anything else I can try???

Many thanks!
Mark
Logged

-Bill- (of wgjohns.com)

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 81
  • Posts: 1340
  • He's just this guy. You know?
    • wgjohns.com
Re: Is there some way to change the code on a socket rocket
« Reply #6 on: October 13, 2007, 05:44:05 PM »
Quote from: barretusa on October 13, 2007, 05:02:56 PM
Hi, yes I am new to this but think I have my head around most of it now.....the only thing I can not get to work is the socket rocket. I have plugged a lamp into the socket above where the AHP is plugged in, I have tried using a macro and chime, I am sending the ON command within 30 seconds but still can not get it programmed. I am using the house code O and tried setting the unit code to 06 and 08. An idea's or anything else I can try???

Many thanks!
Mark

Did you send the on command 3 times within 30 sec of applying power to the socket rocket?
Logged
-Bill- (of wgjohns.com)
bill@wgjohns.com

In the real world, the only constant is change.

When I'm online you can find me in the Home Automation Chat Room!

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: Is there some way to change the code on a socket rocket
« Reply #7 on: October 13, 2007, 05:44:30 PM »
Quote from: barretusa on October 13, 2007, 05:02:56 PM
Hi, yes I am new to this but think I have my head around most of it now.....the only thing I can not get to work is the socket rocket. I have plugged a lamp into the socket above where the AHP is plugged in, I have tried using a macro and chime, I am sending the ON command within 30 seconds but still can not get it programmed. I am using the house code O and tried setting the unit code to 06 and 08. An idea's or anything else I can try???

Many thanks!
Mark

You have to send the command 3 or more times in a row (until the light bulb in the Socket Rocket turns on) within those 30 seconds.

Don't use a macro.  Just drag a chime module icon into the room, set it to the housecode|unit you want,  and click the circular image on the icon 3 times immediately after powering up the Socket Rocket.

Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

barretusa

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Is there some way to change the code on a socket rocket
« Reply #8 on: October 13, 2007, 10:08:36 PM »
Yes I tried it 3 times at 1 second part, I tried it lots of time as fast as I could, and I tried 3+ times up to and over the 30 seconds. Can't think what to try next??

Thanks
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Is there some way to change the code on a socket rocket
« Reply #9 on: October 13, 2007, 10:50:32 PM »
Quote from: barretusa on October 13, 2007, 05:02:56 PM
I have plugged a lamp into the socket above where the AHP is plugged in

Are both outlets electrically equivalent?

Some wall plugs, usually in a kitchen, have the 2 outlets on different breakers and sometimes on different phases. Make sure they are on the same breaker and make sure nothing else is on that same breaker that is corrupting the X10 signal.
Logged

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: Is there some way to change the code on a socket rocket
« Reply #10 on: October 14, 2007, 10:29:20 AM »
Plug the lamp with the socket rocket in it into the same outlet with the MC460/CM15A.  That insures the signals from the controller reach the socket rocket.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

barretusa

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: Is there some way to change the code on a socket rocket
« Reply #11 on: October 14, 2007, 06:36:25 PM »
Tried that, I will move to another wall socket and try again........

Thanks
Logged

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: Is there some way to change the code on a socket rocket
« Reply #12 on: October 15, 2007, 12:23:38 PM »
Also make sure the lamp you have screwed into socket rocket is an incandescent. I tried to program a Socket Rocket with an LED bulb in it, and it would not accept programming. Programmed fine after I replaced with an incandescent bulb. Once programmed it controls the 3 watt CREE LED just fine. Don't know why, since Socket Rocket obviously is connected to neutral. 
Logged
"This aftershave makes me look fat"
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.