Please login or register.

Login with username, password and session length

Author Topic: Using Wireless monitor/camera from WalMart....To View X-10 Cam's For Setup  (Read 41674 times)

Aquadeveloper

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 51

Hi,

Wondering if any one tried using the wireless monitor/camera combo to have a portable monitor
to set up X-10 Cam's.  Its feedback says the 'fisheye' of the camera sucks, but I would like a 'portable' hand held monitor. :)

http://www.walmart.com/catalog/product.do?product_id=4744711

Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127


Wondering if any one tried using the wireless monitor/camera combo to have a portable monitor
to set up X-10 Cam's. 


I haven't read anywhere of anyone trying this particular brand/device. I have... purchased an (other than X10) off-brand wireless camera and receiver. What I found was, of the four selectable channels, I did get a picture from one of them. I don't think I got sound. I didn't test that as it's not lawful to "listen" without permission in my state.... so I don't use sound on any of my security cameras.

If you decide to try the device unpack and test it carefully... and save the receipt. You can always return it if it doesn't work. If it works or not.... please let us know.


Logged
Home Automation is an always changing technology

Aquadeveloper

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 51

Thanks for the reply.

I know about the audio, and was not concerned about being able to receive it.
My main objective was to have a small monitor I could have at the camera (when setting them up initially).

I'll update this should I decide to delve into trying it.

Thanks,
Logged

Chris S.

  • Full Member
  • ***
  • Helpful Post Rating: 9
  • Posts: 74

I had wanted to get a hand held Monitor/Receiver, and ordered this unit
from Beach Camera.
Works well, and I can switch between the 4 channels.


http://www.beachcamera.com/shop/product.aspx?sku=SCSWGMVIEW

Check it out.

Update 12/29/07
The website above no longer carries this product.
Swann Mobile Viewer 2.4GHz 2.5 LCD Color Screen 4 Channel Receiver

But you can "google" the product code "SW-G-MVIEW"
and take a look.



As far as I know, the 4 channels on the Monitor do work with X10.

« Last Edit: December 29, 2007, 10:28:27 AM by Chris S. »
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127

I had wanted to get a hand help Monitor/Receiver, and ordered this unit
from Beach Camera.
Works well, and I can switch between the 4 channels.

http://www.beachcamera.com/shop/product.aspx?sku=SCSWGMVIEW

Check it out.


Thanks Chris S. that's HELPFUL information.
Logged
Home Automation is an always changing technology

Aquadeveloper

  • Full Member
  • ***
  • Helpful Post Rating: 0
  • Posts: 51
Re: Using Wireless monitor/camera from WalMart....To View X-10 Cam's For Setup
« Reply #5 on: November 21, 2007, 10:58:13 AM »

Chris,

That unit looks good.

Do all 4 channels work with the X-10 Cam's?

I think I'm going to try  the portable receiver with 2 wireless camera's at:

http://www.geeks.com/details.asp?invtid=DUAL-CAM-LCD-WHT&cat=VID

Mainly because I have a need for a couple of cameras. :)

Logged

eagle

  • Hero Member
  • *****
  • Helpful Post Rating: 2
  • Posts: 187
Re: Using Wireless monitor/camera from WalMart....To View X-10 Cam's For Setup
« Reply #6 on: December 13, 2009, 12:30:07 AM »

Chris,

Were you able to get the SW-G-MVIEW to work with x10 cameras?

r,
eagle
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.