Please login or register.

Login with username, password and session length

Author Topic: Timer limitation workaround  (Read 10360 times)


  • Full Member
  • ***
  • Helpful Post Rating: 1
  • Posts: 56
Timer limitation workaround
« on: June 23, 2008, 11:06:44 PM »

AHP 3.228
Runs from interface
I don't know if my first post was accepted since I had the wrong file type for an attachment.  I have tested this series of macros to conclude there is a workaround for the macro timer restriction.  I have tested it incrementally up to 24 hours with good results.  My intent was to have the ability to turn a device on or off based on a time period greater than 4 hours.  The only quirk I have found is that if I set the timer(s) to 4:30:00 it automatically changes it to 4:16:00 after the first run.  I won't even fathom a guess as to why.  You can vary the timing based on your needs for different tasks.  I wanted to push a button and let it do its function.  I have attached the macro report from AHP (which I converted from html to pdf).  I didn't think screen shots would have been as easy to read.

tomh -:)
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.