Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Firing DS7000 with AHP  (Read 4002 times)

captain1202

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Firing DS7000 with AHP
« on: December 29, 2007, 03:35:42 PM »
Is it possible to trigger the DS7000 with a signal from AHP?  How could one signal an external relay from AHP to trigger a window unit?
Thanks,
George
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Firing DS7000 with AHP
« Reply #1 on: December 29, 2007, 04:58:08 PM »
Quote from: captain1202 on December 29, 2007, 03:35:42 PM
Is it possible to trigger the DS7000 with a signal from AHP?  How could one signal an external relay from AHP to trigger a window unit?
Thanks,
George

Wiring in a Universal Module (UM506) between one of the wires going to a door/window sensor and it's magnetic switch should do it. All you would have to do.... is turn the module OFF.

But.... I would think there should be a simpler way....
« Last Edit: December 29, 2007, 05:02:10 PM by Dave_x10_L »
Logged
Home Automation is an always changing technology

JMac

  • Hero Member
  • *****
  • Helpful Post Rating: 23
  • Posts: 462
Re: Firing DS7000 with AHP
« Reply #2 on: December 29, 2007, 09:27:16 PM »
If you construct a macro with 5 or 6 Security Light (same code as the DS7000) "ON" and "OFF" signals separated by 1 second delays you can set off the DS7000.
Logged

zach1234

  • Guest
Re: Firing DS7000 with AHP
« Reply #3 on: December 29, 2007, 11:50:56 PM »
Is that the Security Alarm. If so I am intrested too.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.