Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[GatorDeb]

Here's my set up:

I have a PC audio to red/white RCA and a VGA/composite video (yellow plug) adapter.  I plug the video and audio RCAs to the sender, and then hook up the receiver to the TV.  When I go to that input, I hear a crackling noise and no video.  Turning off the sender makes the noise go away, so I have it on the right input.

Help?

Thanks!

[HA Dave]

I have a PC audio to red/white RCA and a VGA/composite video (yellow plug) adapter.  I plug the video and audio RCAs to the sender, and then hook up the receiver to the TV.  When I go to that input, I hear a crackling noise and no video.  Turning off the sender makes the noise go away, so I have it on the right input.

1st step is make sure both the sender and receiver are on the same channel (A through D). Try repositioning the sender-receiver units, make sure the transmission path is as direct, and object free as possible.