Please login or register.

Login with username, password and session length

Author Topic: SR731 "Smart" repeater?  (Read 3026 times)

PajamaGuy

  • Hero Member
  • *****
  • Helpful Post Rating: 32
  • Posts: 522
SR731 "Smart" repeater?
« on: March 03, 2008, 11:20:36 AM »

My new SR731 "Smart" RF Repeater is repeating RF transmissions, however some macros are acting on the initial RF signal and the repeated signal(s) are causing trouble.

Other than starting sensor-initiated macros with a delay, are there any ideas on how to handle the multiple RF signals?
Logged
PajamaGuy
Win-7 - Dell XPS -Automation
VA12a on a dedicated desktop - Video
XTB-IIR & V572RF32

Remote via LogMeIn (FREE) and Ignition

Walt2

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 28
  • Posts: 787
Re: SR731 "Smart" repeater?
« Reply #1 on: March 03, 2008, 08:42:55 PM »

I have a couple of SR731's.  I could never get them to play well with the RF receiver built into the CM15a.  I finally gave up, disabled the CM15a's RF receiver, and I use an external transceiver.

One can have up to four SR731's, in either a star or daisy chain (depending on version of the SR731).  The final RF receiver needs to be "smart" too, and the CM15a just isn't.  The receiver needs to know if it is seeing the original RF signal, or one of the up-to-four repeats.
Logged
* Sears Home Control System, Radio Shack Plug 'n Power, NuTone, Stanley LightMaker, BSR, HomeLink.
* Tecmar Device Master, CP290 (LightHouse), CM11A (AH), CM14A (AH2), CM15A (AHPro).

Boiler

  • Guest
Re: SR731 "Smart" repeater?
« Reply #2 on: March 03, 2008, 09:56:56 PM »

My new SR731 "Smart" RF Repeater is repeating RF transmissions, however some macros are acting on the initial RF signal and the repeated signal(s) are causing trouble.

Other than starting sensor-initiated macros with a delay, are there any ideas on how to handle the multiple RF signals?

PajamaGuy,

If you have "smart macros" installed, use a flag to lock out the repeated RF

Trigger on A1 on and flag1 off
Set flag 1 on (lockout - prevent multiple RF triggers)
.
. macro operations
.
set flag 1 off (re-enable entry).

If you don't have the smart macros option, you can use a dummy module (on your monitored house code) to perform the same function.

Boiler

Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.