Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[djchuckrock]

Things started out Great, I was going thru home construction and suffered a power line glitch (summer 07) which wiped out a few of my modules and couple of switchesand my CM19A. I bought another because I was in a hurry to get things back on line. Sometime around christmas the CM19A stopped relaying RF commands to the powerline. I bought a TM751 transcever things are working great, but no computer control or macros. I sent all 3 of my CM19A's back for exchange.
Got them back, put in fresh batteries the new units plugged the unit into the wall and the computer, unplugged the CM19A. Opened the Monitor, the monitor Received the RF ON command but did not relay the command to the power line. I did the same for the second unit. What am I doing wrong??
Frustrated ?

Chuck White

[djchuckrock]

Sorry my CM19A is really a CM15A just so I don't get anyone confused.

Smile

Chuck White

[Tuicemen]

Have you set the CM15A units to transceive the specific house codes your using?
Tools/Hardware Configuration  set house codes then click update interface!
Not sure if  AHP sets this to none by defalt but the Auto function isn't 100%, reliable use the specific option!
Hint: You can go back and edit your original post! click "Modify" top right side of post

[Puck]

I bought a TM751 transcever things are working great, but no computer control or macros. I sent all 3 of my CM19A's back for exchange.

Also, if you have 4 transceiver's running, make sure ONLY ONE is transceiving a house code (never have 2 or more transceiving the same house code).

[djchuckrock]

The hardware config was set to auto but only channel b was selected I changed it to specific and it seems to work.  Yeww yeeeee. What a coconut, I would think automatic would mean pick all channels.

Thanks Guys