Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[slimyosra]

Hi all,
I wanted to know if there is a device that get the temperature of a room and send it to a CM15Pro module via RF?
my goal is to get a system to control each room separate.
Thank you for your help.
Regards
Slim

[JeffVolp]

I wanted to know if there is a device that get the temperature of a room and send it to a CM15Pro module via RF?

That is something I kicked around a couple of years ago.  I had considered modifying a X10 motion sensor to act as an environmental sensor.  I am not aware of anything like that on the market.

Jeff

[Brian H]

I also have not seen one that used RF and x10 signals.
Smarthome did make a unit called a TempLinc but it used X10 power line signals and a whole House Code. Basically sent a temperature as a house/unit code and a % of dim. Not easy to use and decode with AHP. I believe it emulated one of the automation  thermostat status codes.

[FUNLOVERALWAYS]

try this site. They have a bunch of solutions for X-10 http://www.x10community.com/forums/index.php?action=post;topic=15105.0;num_replies=2

[steven r]

try this site. They have a bunch of solutions for X-10 http://www.x10community.com/forums/index.php?action=post;topic=15105.0;num_replies=2

This is bad link. It goes to a message post option.

[FUNLOVERALWAYS]

Here is the correct link http://www.smarthomeusa.com/Shop/Climate/

Not sure why last time it posted the wrong link...hmm