Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Does the DS7000 send any PLC upon Dis-Arm?  (Read 3976 times)

PajamaGuy

  • Hero Member
  • *****
  • Helpful Post Rating: 32
  • Posts: 522
Does the DS7000 send any PLC upon Dis-Arm?
« on: June 11, 2008, 01:01:07 PM »
We know the DS7000 sends a HC/UC ON, then a HC/UC OFF PLC when the system successfully arms.  Does it send ANY PLC when it Dis-Arms?
Logged
PajamaGuy
Win-7 - Dell XPS -Automation
VA12a on a dedicated desktop - Video
XTB-IIR & V572RF32

Remote via LogMeIn (FREE) and Ignition

zach1234

  • Guest
Re: Does the DS7000 send any PLC upon Dis-Arm?
« Reply #1 on: June 11, 2008, 01:26:50 PM »
Mine newer sent a powerline command.
 
I have a older and newer.
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Does the DS7000 send any PLC upon Dis-Arm?
« Reply #2 on: June 11, 2008, 02:11:21 PM »
Quote from: PajamaGuy on June 11, 2008, 01:01:07 PM
We know the DS7000 sends a HC/UC ON, then a HC/UC OFF PLC when the system successfully arms.  Does it send ANY PLC when it Dis-Arms?

(Since I know you have it) look at your AHP activity monitor.  ;)

I have an older one which does not, but from what I read the newer ones might.

P.S. I moved this to the security section since the thread contains information on X10's security system.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.