Topic: ds7000 Won't Arm (Read 4739 times)

Mountainrivera · « **on:** June 21, 2008, 01:15:15 PM »

New user I setup 9 zones. Get repettitive beeps when I try to arm but no zones show as trouble spots. I held down the bypass button to view zone 9 but no luck. Thnx

PajamaGuy · « **Reply #1 on:** June 21, 2008, 02:29:35 PM »

Unplug - Pull the battery - reinsert battery, install (1) remote then add the zones back one-at-a-time, test-arming after each. (you can hand-hold the unplugged DS7000 as you go from zone to zone - installing & testing as you go)

zach1234 · « **Reply #2 on:** June 21, 2008, 03:19:00 PM »

Try like he said I had that same problem except mine had 52 sensors so they kept sending the check back code and registering on the wrong consol. Too bad there isn't a delete one option.

Mountainrivera · « **Reply #3 on:** June 21, 2008, 05:56:58 PM »

Thanks. Didn't work. I tried with a couple of devices and every time it beeps constantly.

Mountainrivera · « **Reply #4 on:** June 21, 2008, 06:07:38 PM »

Just found the answer on google (not on this forum).

I had the main unit set to max and it beeps for 60 seconds before it arms.

News:

Author Topic: ds7000 Won't Arm (Read 4739 times)

Mountainrivera

ds7000 Won't Arm

PajamaGuy

Re: ds7000 Won't Arm

zach1234

Re: ds7000 Won't Arm

Mountainrivera

Re: ds7000 Won't Arm

Mountainrivera

Re: ds7000 Won't Arm