Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[pcman3550]

I have an Eagle Eye M14A motion sensor that I want to use to control my outside lights to come on at dusk and off at dawn.  The switch to the outside lights is controlled by a single pole switch inside.  If I replace that single pole switch with a Wall Switch Module (WS467) and with my existing Mini Transceiver (TM751) can these together control those outside lights to come on at dusk and go off at dawn? 

[Brian H]

If the WS467 is set to the Dusk Dawn Address it should work fine. Baring any X10 line signal problems from the TM751 to the switches installed place.
Incadescent type bulbs in the lights?

[pcman3550]

Yes, these are incandescent bulbs outside.  Thanks!

[Brian H]

You are welcome. Only other thing I can think of. If the lights shine on the motion sensor. It is possible for them to cycle on and off as it thinks the sun is rising and setting