OK I have mapped out my house electrical circuits. I have now a better view of my problem areas. So with three XPPF filters I was able to achieve 100% reliability with the palmpad remote. Still hit and miss with AHP. AHP crashed three times this week with the BSD stating something wrong with x10uif.sys. So, I did a reinstall of AHP 3.236 on Wednesday and it is now Saturday and still stable. Back to my hit and miss, I discovered when cooking(220V electric oven), washing(220V water heater) or when the HVAC system is running(220V indoor blower and 220V outdoor heat pump), and/or the pool pump motor is running, all seems good.
Question: Do I need more than one phase coupler because I live in a mobile home with three breaker panels. One main with the meter has the heat pump and the pool equipment as well as a room addition. The sub panel inside has all lights, plugs, oven, blower, water heater, etc. And one in the garage which has a the washer dryer and a few lights and plugs. And should I use a repeater or how would I know if I need one before spending extra money?
Thanks for all your help!
Author
Topic: HELP. can use remote to turn on light but activehome doesnt do it (Read 10139 times)