Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Kaptan]

I have a very simple setup with a Protector+ Security Console + CM15 with AHP.
In the below screen shot you can see all of the modules I have with their addresses.
I am quite confused by some of the orange and red markers on the graph.
Why are the following an issue?
A3 & A4
B1-B3
All of J & O
P16
I have never set anything on J or O, yet in my activity monitor I see a Receive RF - O TV
Any idea what this means?

Thanks for any advice.

[Puck]

From what I have seen, the orange markers as when an address is called from within AHP/CM15A but does not have an associated device defined (E.G. called from a macro). The red markers are from an external source (E.G. your red A6 is from the dusk/dawn sensor of your A5 motion sensor).

And of course, a green marker indicates there is a defined AHP module set to that address.

Use the "Clear History" to get rid of of the orange & red makers to see what ones come back.

[Kaptan]

Use the "Clear History" to get rid of of the orange & red makers to see what ones come back.

Thanks for the tip, I didn't realise this graph represented on-going traffic, (rather than just assigned addresses).

Once cleared, all that remains for now is the green defined modules. After a few days I'll see what comes back.
I'm still confused as to why the HC J & O have shown up, but I'll keep my eye on the activity monitor for this.
And the one-off P16, now that's just weird.

[Brian H]

The P16 maybe normal. I have seen it mentioned before. Feeble memory eludes me on what it was. Hope someone remembers.

[JMac]

P16 will be there everytime the computer is shut down and restarted.  (I don't know the real purpose.)  You can even assign a ghost module there; create a macro with P16 as the trigger, and it will activate on start-up.
As for the other red squares, add a ghost module at J1 and O1 and see if that doesn't eliminate the yellow ones.................

[Kaptan]

P16 will be there everytime the computer is shut down and restarted.

I had a look at the history this morning and you are spot on JMac.
Now to think of a creative macro to utilise this P16 command.
Turn on speakers?  Turn on Printer?  Turn on external drives? . . . the choices!

Oh, by the way, none of the J or O addresses have reappeared on the chart, so I don't know what that was about.