Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: Set initial macro delay to 00:00:00  (Read 9131 times)

betatester

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Set initial macro delay to 00:00:00
« on: September 24, 2008, 03:15:57 AM »
By changing the registry key:
HKCR\CLSID\{001000AF-2DEF-0103-10B6-DC5BA692C858}\X10\AHP\Settings\System\MacroDelay from 1000 (decimal) to 0 (decimal)
all initial macro timers will have the value 00:00:00
Changing to 1 second is not possible

Note: Change this value when AHP is not running and check the register value after each configuration change via Preferences
Logged

Puck

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 171
  • Posts: 1799
Re: Set initial macro delay to 00:00:00
« Reply #1 on: September 24, 2008, 10:11:27 AM »
The delay default can also be changed within AHP in the Smart Macros tab under tools/preferences.  ;)
Logged

betatester

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 9
Re: Set initial macro delay to 00:00:00
« Reply #2 on: September 24, 2008, 11:23:13 AM »
Aah...you can fill in 0 there   ;D
I was just pressing up & down to a minimum of 1  8)
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 283
  • Posts: 10509
  • I don't work for X10, I use it successfuly!
Re: Set initial macro delay to 00:00:00
« Reply #3 on: September 24, 2008, 01:23:29 PM »
Quote from: betatester on September 24, 2008, 11:23:13 AM
Aah...you can fill in 0 there   ;D
I was just pressing up & down to a minimum of 1  8)
I believe you can specify a number for all the options in the program instead of just using the arrows!
>!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.