Please login or register.

Login with username, password and session length

Author Topic: 802.1.g pops and clicks  (Read 24102 times)

thunder

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
802.1.g pops and clicks
« on: June 08, 2007, 11:02:30 AM »

is there a fix for my wireless 802.1.g network.
i have a great picture through A/V in, but my network causes pops and clicks on the tv every 1 or 2 minutes.
any ideas to fix or filter.?
thanks.
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: 802.1.g pops and clicks
« Reply #1 on: June 08, 2007, 09:45:46 PM »

Is your network modem, and your TV signal both supplied from a cable provider?

If so, how is the cable feed split?
Is it split outside at the cable box?
Is it split inside with a little metal splitter?
Is it run through a lighting protector before you split it?
Do you receive ALL the TV channels well or is there some (low or high numbered) that are weak?
Are your connections tight?

 

Logged
Home Automation is an always changing technology

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13295
Re: 802.1.g pops and clicks
« Reply #2 on: June 09, 2007, 06:15:44 AM »

Are you using an X10 Video Sender receiver setup? Most wireless networks use the same 2.4 Ghz band as the wireless video senders.
Some have had luck with picking channels that do not interfere with each other. The X10 units have a small switch to set the channel. You may want to try all 4 and see if one is ok. Also many wireless network adapters have a way to pick their channel. That maybe another thing to try.
Logged

thunder

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: 802.1.g pops and clicks
« Reply #3 on: June 09, 2007, 09:49:18 AM »

thanks for the input.
i have direct tv and cable internet.
yes i am using X10 Video Sender receiver setup.
kitchen laptop is the problem.

i have found a work around,the problem seems to be the wireless laptop in the kitchen, were the tv is.
anyhow although the problem is only slightly annoying i found by disabling the network connection on the laptop the problem goes away.So i have put the network connection (icon) on the desktop so i can disconnect and reconnect at will.
i will try the diffrent channels and get back here to let you know my findings,even though im quite happy with the work around.
Logged

thunder

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 3
Re: 802.1.g pops and clicks
« Reply #4 on: June 09, 2007, 02:34:40 PM »

didnt have any luck on channels A,B,C,D
but thats ok,the fix is just a click away. ;)
Logged

Gody

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 1
Re: 802.1.g pops and clicks
« Reply #5 on: December 18, 2008, 01:02:02 AM »

Are there any new solutions to this. I am having the  same problem. When my wifi is connected lots of pops clicks. Using the wifi modem to stream netflix from pc to tv so unplugging the modem is not an option.

I have tried channels a-d no difference between them.
Logged

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: 802.1.g pops and clicks
« Reply #6 on: December 18, 2008, 02:40:13 AM »

The information at the link below from a previous discussion of the subject may help.
http://www.x10community.com/forums/index.php?topic=8005.msg51423#msg51423
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.