Please login or register.

Login with username, password and session length

Author Topic: arming delay problem  (Read 5929 times)


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 2
arming delay problem
« on: December 23, 2008, 06:53:56 AM »

When I use the large hand remote to arm, it counts down continuously but never arms. I will come home an hour or two later and it's still counting down. The remote is set to max and the main entry door's sensor is also set to max. All other sensors are set to min.
All remotes (large and key fob) arm without delay as they should.


  • Newbie
  • Helpful Post Rating: 0
  • Posts: 8
Re: arming delay problem
« Reply #1 on: January 03, 2009, 06:42:25 PM »

Have found that when you arm the system (either in delay mode or instant mode) all sensors have to be quiet or made.  If you are in delay mode, you can then open and close door sensors, and one minute later the system will arm.  If any of the sensors are open when you try to arm, in either mode, you'll get the symptoms you described.  Seems a little user-unfriendly to me - I have to close the garage door before I start leaving the garage...
Logged | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 All rights reserved.