Please login or register.

Login with username, password and session length

Author Topic: Automated Tv mount  (Read 4649 times)

Jsnlong

  • Hero Member
  • *****
  • Helpful Post Rating: 17
  • Posts: 351
    • XKAR
Logged
People are afraid of robots taking their jobs......The same jobs they complain all day about doing!!

Join the chat at http://www.bdshost.com/ac/

Coach of XKAR
Xenia Kids And Robots
www.xkar.org

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Automated Tv mount
« Reply #1 on: January 29, 2009, 12:20:29 PM »

Yes cool but it might be cheaper to just buy a TV big enough for everyone in the room to see it.
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Automated Tv mount
« Reply #2 on: January 29, 2009, 02:09:52 PM »

Yes cool but it might be cheaper to just buy a TV big enough for everyone in the room to see it.

Says:  Fits most flat panel displays with an outside width of 40" - 63"

Sounds big enough for me!
Logged
Home Automation is an always changing technology

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Automated Tv mount
« Reply #3 on: January 29, 2009, 04:46:02 PM »

I guess my real point was if you have a screen that is big enough why do you need to move it? Do LCD TVs have that narrow an angle of view?
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

Jsnlong

  • Hero Member
  • *****
  • Helpful Post Rating: 17
  • Posts: 351
    • XKAR
Re: Automated Tv mount
« Reply #4 on: January 29, 2009, 06:27:46 PM »

Yea but with today's open floor plans .you could move it to watch from the kitchen or if your the only on watching and your in your lazyboy you could center on you and know one else. My bed room TV is mounted on a unit like this but not powered...so I can move it while I'm in bed and also the wife can swing it around when she is running on the treadmill.
Logged
People are afraid of robots taking their jobs......The same jobs they complain all day about doing!!

Join the chat at http://www.bdshost.com/ac/

Coach of XKAR
Xenia Kids And Robots
www.xkar.org

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Automated Tv mount
« Reply #5 on: January 29, 2009, 06:44:56 PM »

Do LCD TVs have that narrow an angle of view?

No... CD TV's have a really [wide] nice angle of view. Actually.. I think everything has a wider angle of view than a traditional tube TV. But the old tube TV's were so heavy and cumbersome we often didn't even think to turn them for a better/fuller view. Often we just tolerated a bad angle.. or even sun on the screen because turning the TV was such a hassle. The new 42 inch, 35 pound LCD's (mine) just helps to change the mind set of set-it-and-forget-it.

I like the idea of a motorized mount.

Now if we can get it to face-track automatically.... and only recognize MY face.
« Last Edit: January 29, 2009, 06:47:25 PM by Dave_x10_L »
Logged
Home Automation is an always changing technology

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Automated Tv mount
« Reply #6 on: January 29, 2009, 06:58:57 PM »

...I like the idea of a motorized mount.
Now if we can get it to face-track automatically.... and only recognize MY face.
Don't get me wrong. I think it would be cool also. I was just questioning the cost/value factor.

As a side note, if Dave got one how long would you bet it would take for him to post a YouTube video of it under voice control via BVC?  ;D
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Automated Tv mount
« Reply #7 on: January 29, 2009, 07:07:36 PM »

... if Dave got one how long would you bet it would take for him to post a YouTube video of it under voice control via BVC? 

You got that right:  TV... return to center position.

But you know... you were using BVC to tell your cameras where to go ahead of me. I had to buy a Ninja, and then modify the internal antenna on my CM15A. But now my cameras scan on command too.
« Last Edit: October 14, 2009, 02:45:40 AM by -Bill- (of wgjohns.com) »
Logged
Home Automation is an always changing technology

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: Automated Tv mount
« Reply #8 on: January 29, 2009, 07:11:26 PM »

...You got that right:  TV... return to center position...
I figure you'd have it automatically face your chair when you sat down as well.  :D
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: Automated Tv mount
« Reply #9 on: January 29, 2009, 07:28:59 PM »

I figure you'd have it automatically face your chair when you sat down as well. 

Well a lot can be done with a simple (automated) chair. But again... notice the video's credits.... a concept by steven r .

But.... I've been nagging Bill about adding face recognition to BVC
« Last Edit: October 14, 2009, 02:46:33 AM by -Bill- (of wgjohns.com) »
Logged
Home Automation is an always changing technology
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.