Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[timaboss]

I have the powerhouse console set to run2 so i get the tone when a door is opened.  If I leave a door open I get the tone about once an hour without another door being opened.  Is there a way to bypass a door without setting the alarm?  I want to be notified only if another door is opened.
Thanks.

[Puck]

Is there a way to bypass a door without setting the alarm?  I want to be notified only if another door is opened..

Hold the bypass button down on the console while arming.

[timaboss]

I dont want to set the alarm.  When i am sitting outside and the patio door is open, I only want to hear the tone if a different door is opened.

[Puck]

Sorry about that... mis-read your question. Unfortunately there is no way of ignoring a single zone short of reprogramming without that one; which is not a very practical method.

Another option would be attach a spare magnet to the open door's sensor; then the console will not chime for it ever hour, since it would think it's closed.

[HA Dave]

If the idea is to have a smoke on the patio... yet still keep an ear-out for the chime (so a kid doesn't slip away)... there are solutions.

The X10 alarm console is also a transceiver. So you could put a regular (NON security) "eye" sensor at the front door. Putting a eye-motion sensor between a door and storm door can be very handy. Opening ether door would allow the sensor to see the person doing the opening and trigger a House/Unit code On. Since there isn't really any limit on the number of units set on one code... you could have the sensor chime a chime AND turn on a light.

Being greeted by a light when entering home is always nice... and it would be one more light that flashes when the alarm is triggered too.

[Tuicemen]

Sorry about that... mis-read your question. Unfortunately there is no way of ignoring a single zone short of reprogramming without that one; which is not a very practical method.

Another option would be attach a spare magnet to the open door's sensor; then the console will not chime for it ever hour, since it would think it's closed.

Good Idea Puck! The DS7000 would think that door is closed if the extra magnet contact was met. No other notification chimes would be sent for that door (untill one closed it again) allowing another opened door to trigger the chime!