Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: PHS01 Floodlight not working  (Read 9772 times)

Khris

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 12
PHS01 Floodlight not working
« on: February 22, 2009, 03:37:40 PM »
I'm having problems getting my PHS01 Floodlight up and running.  It's wired in properly and connected to a regular wall switch (non-X10) however the lights never come on, nor does the unit seem to be working at all.

Can anyone offer some suggestions on what to try?

Thanks
Logged

Tuicemen

  • Administrator
  • Hero Member
  • ****
  • Helpful Post Rating: 282
  • Posts: 10497
  • I don't work for X10, I use it successfuly!
Re: PHS01 Floodlight not working
« Reply #1 on: February 22, 2009, 04:09:35 PM »
Ensure the power is on and issue an x10 ON command to it!
Logged
Please Read Topic:
General Forum Etiquette
Before you post!

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: PHS01 Floodlight not working
« Reply #2 on: February 22, 2009, 04:11:02 PM »
Quote from: Khris on February 22, 2009, 03:37:40 PM
.......... It's wired in properly and connected

If it is wired properly... yet it doesn't work.. its defective.

However... as a trouble shooting guide: When I don't know what is wrong with something that doesn't work. I start at a point where things DO work. Often that can be the circuit panel. If you have a working breaker and power to the line... next check the switch. Then power at the motion sensor... power to the bulb wires... the bulb sockets.. the bulbs. Somewhere between the main breaker... and the bulb... you will find the place where things stop working.
Logged
Home Automation is an always changing technology

Khris

  • Jr. Member
  • **
  • Helpful Post Rating: 0
  • Posts: 12
Re: PHS01 Floodlight not working
« Reply #3 on: February 22, 2009, 08:05:38 PM »
I've tried issuing an On/Off command to it however nothing happens.  I'm pretty sure there's something wrong with it as I know it's wired correctly.  I can attach a standard light fixture and the electrical works fine.
Logged

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: PHS01 Floodlight not working
« Reply #4 on: February 22, 2009, 08:41:14 PM »
Quote from: Dave_x10_L on February 22, 2009, 04:11:02 PM
If it is wired properly... yet it doesn't work.. its defective.
Logged
Home Automation is an always changing technology

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: PHS01 Floodlight not working
« Reply #5 on: February 23, 2009, 01:40:52 PM »
Quote from: Khris on February 22, 2009, 08:05:38 PM
I've tried issuing an On/Off command to it however nothing happens.  I'm pretty sure there's something wrong with it as I know it's wired correctly.  I can attach a standard light fixture and the electrical works fine.
Does it click when you send the ON-OFF commands?
Logged
"This aftershave makes me look fat"

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: PHS01 Floodlight not working
« Reply #6 on: February 23, 2009, 02:13:15 PM »
Quote from: dave w on February 23, 2009, 01:40:52 PM
Does it click when you send the ON-OFF commands?
Does the OP have a transceiver set to the correct House Code?
Logged
Home Automation is an always changing technology

steven r

  • Advanced Member
  • Hero Member
  • ******
  • Helpful Post Rating: 74
  • Posts: 2189
  • Halloween with X10
Re: PHS01 Floodlight not working
« Reply #7 on: February 23, 2009, 03:08:03 PM »
Quote from: Khris on February 22, 2009, 08:05:38 PM
I've tried issuing an On/Off command to it however nothing happens.
Does it turn on when it senses Dusk or Motion?
What are you using to issue the On/Off commands? Can you move it closer to the flood lights? Preferably on the same circuit to test?
Also while I'm asking, what kinds of bulbs are you using in the Floods? Regular incandescents? CFLs? LEDs?
Logged
BVC let's me tell my camera where to go!
:) Murphy is my beta testing pal. He helps me find problems whether I like it or not. :)

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: PHS01 Floodlight not working
« Reply #8 on: February 23, 2009, 09:26:06 PM »
Quote from: Khris on February 22, 2009, 08:05:38 PM
I've tried issuing an On/Off command to it however nothing happens. 
Can you hear it click? If you do hear it click when you send ON-OFF, are you sure you have the light sockets wired correctly?
Logged
"This aftershave makes me look fat"
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.