Topic: Which switch is best for bathroom vent fan? WS467 keeps fan on too low. (Read 3406 times)

bigguy1217 · « **on:** March 20, 2009, 04:42:29 PM »

The wall plate is a double plate, one for light and one for vent fan. It is a small bathroom so I want both controled. I tried a WS467 but when the fan come son it is WAY slowey than with standard switch. Is the a heavier duty switch that will still fit in a double plate?

Brian H · « **Reply #1 on:** March 20, 2009, 04:49:01 PM »

You can not use any two wire dimmer switch on a fan motor. The switch steals power through the load.
Also using any dimmer switch with a motor can be a problem. Unless designed for inductive loads.
They do make wall switches that have a relay in them to control loads like a fan motor. Do you know if the switch box has a Neutral Power wire in it? A neutral is needed for the switch to work as it does not steal power through the load.

trol1374 · « **Reply #2 on:** March 20, 2009, 07:02:32 PM »

As what Brian said.... and if you do have the neutral wire, then use the pro rocker switch. It is an on/off style switch and they look nice. They do make a "clunk" sound when activated on/off.
Look at the x10pro stuff.

BVD · « **Reply #3 on:** March 20, 2009, 11:55:14 PM »

Give this a try. Might have to buy a 3.00 cover plate with one toggle opening and 1 paddle opening.
See attached sketch for proper wiring.

Till Later,
Bob

News:

Author Topic: Which switch is best for bathroom vent fan? WS467 keeps fan on too low. (Read 3406 times)

bigguy1217

Which switch is best for bathroom vent fan? WS467 keeps fan on too low.

Brian H

Re: Which switch is best for bathroom vent fan? WS467 keeps fan on too low.

trol1374

Re: Which switch is best for bathroom vent fan? WS467 keeps fan on too low.

BVD

Re: Which switch is best for bathroom vent fan? WS467 keeps fan on too low.