Timers not working same with macros

[astrothug]

I have two socket rockets on a motion censer. And a marco when activated from motion censer should stay on for 10 min. But it rarly does i have too adjust the time too 2 hours then it stays on for a few min. Also set up timers to wake us up. It worked one day. But not now? I thought it might have something to do with daylight savings.

I have all the plugins. Sorry guys im typing this on iphone.


David

[Puck]

To start with, are the motion sensors set to a different address than the socket rockets?

[astrothug]

yes and the motion censer works with the socket rockets. b1 for both....thanks Puck.

[Puck]

If you are using macros for control, you should not have the socket rockets set to the same address as the motion sensor. I suspect the off delay signal from the motion sensor is what is shutting off your socket rockets earlier than you want.

[Kramer Chins]

I haven't had much luck with Socket Rockets myself.

Tried one on the Porch with a Motion Sensor.. Sometimes it worked and most of the time it didn't.

Then I installed Wall Switch and a MS16A.....  Works like a charm EVERYTIME now!

[astrothug]

If you are using macros for control, you should not have the socket rockets set to the same address as the motion sensor. I suspect the off delay signal from the motion sensor is what is shutting off your socket rockets earlier than you want.

Really Ok so then B1 = socket rockets B2 = Motion Sensor then how do I get the Sensor to talk to the Socket rocket...OHH I name the Marco B2 got it...thanks Puck....


Ok that worked.