I'm at a loss. I've got all my camera's (4 wireless)on House code D, got a 751 transceiver on D, and one on A for the house modules. I have three wall switch modules, one on A1,one on A2, and one on A3. Also a floodlight/motion sensor all working. But none of my macro's work automatically. I've tryed everything but they don't work. I can click on run macro and they will run but once I've turned them on they never activate any lights. I can turn the lights off and on with the remote, and sometimes A1 won't respond to the remote altho the 751 on house code A clicks, the light doesn't respond. Also my cams won't stay on but only 15 minutes. The still function works for about that long. Are these normal problems? If so I'm hanging it up and running the cams straight to a recorder without the pc. If I could get the macros working I would be a step closer. I don't figure the software will ever stay running from what I've read. My macros are simple...at a start time they turn on a light (A1) then 30 minute wait, and turn same light off. Any help would be great.