Contact | X10.com
Please login or register.

Login with username, password and session length

Author Topic: WS467 Dim Lights When Turned On, Won't Brighten  (Read 4918 times)

Farmer

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
WS467 Dim Lights When Turned On, Won't Brighten
« on: June 02, 2009, 04:13:02 PM »
OK, I just installed a WS467 in my barn to handle three simple 60watt incandescent lights.   When I turn them on either from Active Home, the remote or at the switch, they BARELY light.  Just a filament in the bulb glows.  I checked the settings and have the switch to 100% power, not dimmed.  I re-checked my electrical connections to the switch to make sure of good contact.  I'm new at this and checked FAQs before posting.

Any suggestions would be appreciated.  Thanks in advance,

Tom B:(
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: WS467 Dim Lights When Turned On, Won't Brighten
« Reply #1 on: June 02, 2009, 04:28:46 PM »
http://kbase.x10.com/wiki/Newer_Wall_Switches_and_Preset_Dim

Sounds like you have the new Soft Start models.
Logged

Farmer

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: WS467 Dim Lights When Turned On, Won't Brighten
« Reply #2 on: June 02, 2009, 06:17:42 PM »
Thank you Brian, case solved. :)%
Logged

Farmer

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: WS467 Dim Lights When Turned On, Won't Brighten
« Reply #3 on: June 02, 2009, 10:17:22 PM »
But wait...
I can control from Active Home, but when I use my PalmPad Remote with Mini Tranceiver....NOTHING B:(  If I watch it on Active Home, the switch turns on but brightness is 0%.  If I press the up button on the remote, nothing happens.  If I move the slider up on Active Home, it works as it should.
I guess what I'm trying to say is the remote only turns the switch on and off but it does not bright from 0% to 100%.
 B:( B:( B:( B:( B:(
Logged

Farmer

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: WS467 Dim Lights When Turned On, Won't Brighten
« Reply #4 on: June 02, 2009, 11:23:20 PM »
Please disregard, I got 'er figured out.  Didn't have my Transceiver set up in Hardware Preferences.
Logged

Brian H

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 305
  • Posts: 13308
Re: WS467 Dim Lights When Turned On, Won't Brighten
« Reply #5 on: June 03, 2009, 06:38:09 AM »
Glad you found the problem. The Tranceived House Code settings thing, is a common problem we see here. Sometimes has to be forced.  ;D
Logged

Dan Lawrence

  • Hero Member
  • *****
  • Helpful Post Rating: 68
  • Posts: 3991
Re: WS467 Dim Lights When Turned On, Won't Brighten
« Reply #6 on: June 03, 2009, 04:50:14 PM »
To Farmer:

By the way, in posts, the X10 control program is Active Home Professional  usually referred to as Active Home Pro.  It uses the USB CM15A Interface and has plug in programs.

The older X10 control program was Active Home, which used the serial CM11A interface.  Active Home had no plug-ins.
Logged
I don't SELL this stuff... BUT I sure do ENJOY using it!!!

Farmer

  • Newbie
  • Helpful Post Rating: 0
  • Posts: 5
Re: WS467 Dim Lights When Turned On, Won't Brighten
« Reply #7 on: June 03, 2009, 08:38:54 PM »
You're right once again, my bad.  I've got ActiveHome Pro.  Sorry about that.
Logged
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.