Topic: Write a Macro command to repeat sending an On signal until the mod turns on (Read 2234 times)

KenWong · « **on:** June 11, 2009, 09:36:45 PM »

I guess due to noise on my lines, I need to repeat sending a command several times before a module will turn on. This feature is available when you want to set a timer.

How do you write a macro that will continue to send an "On" signal to a module when it might not get the first or subsequent signals due to line noise?

Much Thanks

Ken

Knightrider · « **Reply #1 on:** June 11, 2009, 09:41:52 PM »

How will AHPro (anagram for Oprah) recognize the module's status? Many modules do not confirm or deny status to the controller. The one's that do require a status request from said controller.

News:

Author Topic: Write a Macro command to repeat sending an On signal until the mod turns on (Read 2234 times)

KenWong

Write a Macro command to repeat sending an On signal until the mod turns on

Knightrider

Re: Write a Macro command to repeat sending an On signal until the mod turns on