Contact | X10.com
Please login or register.

Login with username, password and session length
Pages: 1 [2]

Author Topic: x-10 Direct connect option  (Read 29339 times)

Charles Sullivan

  • Hero Member
  • *****
  • Helpful Post Rating: 94
  • Posts: 1565
    • HEYU - X10 Automation for Linux, Unix, and Mac OSX
Re: x-10 Direct connect option
« Reply #15 on: July 05, 2009, 11:28:11 AM »

If all else fails and you have 16 or fewer devices to control, one solution would be to use the built-in appliance module on a TM751 Transceiver for each device (each set to a different housecode).  Control them with RF and forget about the powerline.  The TM751 are available in multipacks on eBay for less than $9 apiece.

Logged
Yesterday it worked.
Today it doesn't work.
X10 on Windows is like that.

HEYU - X10 Automation for Linux, Unix, and Mac OS X     http://www.heyu.org

HA Dave

  • Hero Member
  • *****
  • Helpful Post Rating: 175
  • Posts: 7127
Re: x-10 Direct connect option
« Reply #16 on: July 05, 2009, 01:03:23 PM »
Quote from: Charles Sullivan on July 05, 2009, 11:28:11 AM
If all else fails and you have 16 or fewer devices to control, one solution would be to use the built-in appliance module on a TM751 Transceiver for each device (each set to a different housecode). 

What a great idea Charles! One could even add in some RR501's and set them to number nine.... increasing the number of units to 32.
Logged
Home Automation is an always changing technology

dave w

  • Community Organizer
  • Hero Member
  • ***
  • Helpful Post Rating: 139
  • Posts: 6116
Re: x-10 Direct connect option
« Reply #17 on: July 05, 2009, 05:25:35 PM »
Genius,...the man is a genius.
Logged
"This aftershave makes me look fat"
Pages: 1 [2]
« previous next »
 

X10.com | About X10 | X10 Security Systems | Cameras| Package Deals
© Copyright 2014-2016 X10.com All rights reserved.