Topic: different housecodes, same unit code triggered on both (Read 3066 times)

birdzeye · « **on:** July 30, 2009, 05:05:14 PM »

One camera on B11 and a light on E11 are both turning on when only the B11 camera is triggered ON by RF remote. Why is this happening?

steven r · « **Reply #1 on:** July 30, 2009, 06:02:11 PM »

I've never heard of a duel RF signal coming from a remote.
Barring a macro to tell it to turn on the other, it appears that the devices functionally consider themselves on the same address.
There's a chance that the dial setting is wrong or even a small chance that the setting dial is defective. Go to to the device that shouldn't be coming on and reset it's code. If it has dials, rotate them a few times before resetting.

robotmaker · « **Reply #2 on:** July 31, 2009, 08:01:55 PM »

also try different house codes on remote or try using another rf sending device to see if its a bad remote

News:

Author Topic: different housecodes, same unit code triggered on both (Read 3066 times)

birdzeye

different housecodes, same unit code triggered on both

steven r

Re: different housecodes, same unit code triggered on both

robotmaker

Re: different housecodes, same unit code triggered on both